Centrifugal Spray Dryer

Solvent, emulsion or suspending solvent will be spray into small drops and dried into powder or granule during the falling process. Water is evaporated and final dried powder will be collected at bottom of spray tower. Feature of spray dryer is as followed: 1. The drying speed is high when the material liquid is atomized, the surface area of the material will increase greatly. In the hot-air flow,95%-98% of water can be evaporated at a moment. The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality. 2. The production procedures are simple and the operation and control are easy. The liquid with moisture contents of 40-60%(for special materials, the contents might be up to 90%).can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity. 3. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition within a certain range. 4. It is very convenient to carry out control and management. 5. The whole process is operated in tiny negative pressure. Operating condition is good. 6. It is continuous operating machine.